T1 case cable management quick guide

Regular mounted, psu fan faces outward.

-------------------------------------

24p length: about 110mm to 130mm curve or 90mm to 120mm cruve, depends on the psu's plugs position.

suggest +20mm if want to add combs on unsleeved cable 24p. 24p in unsleeved cables at this short length is really stiff. or just leave 24p no comb.

for silicone cable, embossed cable, use zip tie to tie 24p up is also a good choice.

-------------------------------------

cpu8p length: about 300mm to route behind mobo.

-------------------------------------

gpu length: 

-350mm for 12vhpwr cable or the connector is on the middle position

-300mm for gpu8p/gpu6 if the connector is on the gpu edge. can even do shorter around 200mm. 300mm routes beside the gpu, 200mm routes between the psu and gpu.

-------------------------------------

cable material: silicone cable, embossed cable, unsleeved cable.